*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
Features: The mini FailSafe Unit prevents runaways by automatically throttling back the servo to a pre-programmed setting in event of interferences or low battery voltage. It offers the ease of one button programming and two LED status indication. Unit simply plugs in for quick installation and works with any scale of R/C car, boats and other applicable vehicles. Voltage: 4.8V or 6.0V. Include: 1 switch, 2 LED. Dimension: 21x33x9.5mm 0.8x1.3x0.37 inch. Weight: 11 gram 0.388oz Operating Temperature: -5 to 60 Degree C. 41-140 Degree F. Input impulse: 0.7 ms- 2.3ms Direction: 1. Connect failsafe unit to servo of the receiver that is to control the throttle. Unit should shows green led should be on. 2. Press the SET button when you set this unit, the green led should turns on and stay on (no flashes). Note RED led should be FLASHING. 2.1. Release the SET button. Setup complete. 3. In operating mode: when interferences is acuter or interference happens, the RED led will turn on and locks. As the RED led cuts off and turns ON GREEN LED, means interference is gone and back to unlock (standby mode). 4. When receiver battery supply voltage decreases to low level, fail-safe will activate (RED led on).